I love giving gifts! And not just any gift, but unique personalized gifts.
What better way to personalize a gift than with a name, initial, monogram, nickname, etc. on it?
A great way to make a personal, unique and sophisticated gift is to etch a cake plate (or pie plate or casserole dish or glass pitcher or glass vase or glass jar or mirror or window...you get the idea!)
Now it's your turn...
What you will need:
Glass Dish
Printout of the design you want to etch
Masking tape
Clear contact paper
X-acto knife
Paint brush
Armour Etch Cream
**Just a quick note about the Armour Etch Cream: I bought the 3 oz. bottle (with a 40% off coupon of course) and I was concerned it wasn't going to be enough to etch two pie plates. I almost bought the larger bottle, but luckily I didn't. Since I bought that bottle, I have etched 3 cake plates, 2 pie plates, 2 casserole dishes and a large counter top glass beverage dispenser and I still have half of the bottle left.**
Once you have decided on a piece to etch, make sure you clean with soap and water and the piece is completely dry before you begin.
Print your design in bold black print and trim to fit. Tape your design to the inside of your piece. Be sure to line it up exactly where you want the etched design to end up. This will work as your stencil.
**If you choose to etch a piece with a rounded edge like my cake plate cover, it may be difficult to get it lined up perfectly. Smooth it against the glass as much as possible.
Once you have your stencil where you want it, cut a piece of clear contact paper larger than the design. You want to have plenty of extra area covered on each side of the stencil. Smooth out all bubbles (or if the edge is rounded, smooth as many as you can...you want to make sure there are no bubbles in the same space that you are going to etch)
This part can require a lot of patience, depending on how intricate your stencil is. Use your X-acto knife to create the stencil. Trace along the outline of your design to cut out the same design in the clear contact paper. **Keep in mind the etching will be done on the area where the contact paper is removed.
(It's pretty hard to get a picture of the design in the clear contact paper, but if you look closely you can see the "W")
Elevate the side of the glass piece you are etching before applying the Armour Etch. This will help minimize any dripping. If possible, lay the piece down so the stencil area is parallel to the counter top.
Using a paintbrush, fill in the entire stencil. I have found that it works best if you put a thick coat on. I always use a layer thick enough that you can't see any glass through the cream. Let it set on the stencil for at least 5 minutes. If you're not in a rush, let it set for 10 minutes.
After letting it set up, rinse all the cream off using cold water. Once the thick layer of cream has been washed off, remove your stencil and thoroughly wash the entire piece.
Viola! A personalized unique piece!
![]()
