Monday, March 12, 2012

Citrasolv Dishtowel Tutorial

I love learning about new ways to be crafty.  When I heard about Citrasolv transfers, I went crazy.  I started using it on everything I could think of.  I added a design to the seat of a metal chair (but once again I forgot to get a picture of it before it sold at the antique store), I added a few designs to some t-shirts and more recently I decorated some plain white flour sack dish towels.

A friend of mine recently purchased her first house.  I really wanted to send her a little housewarming gift and I immediately thought of Citrasolv dish towels.  Now, I am going to show you had to make your own.


Supplies:
Citrasolv (found at health food stores, I found it at Whole Foods)
Flour Sack Dish Towels (or any fabric or fabric surface if you aren't making dish towels)
Cotton Balls
Laser Jet Printer (Ink Jet will not work)
Scissors (or something with a smooth surface to use during the transfer)


Step 1:  Create your design. I created an Audrey Hepburn design with one of her quotes using Publisher.  I created a poster using the dimensions of my flour sack towel.  Publisher will split the design up into several pages that create a large poster.  The other way to do this (and probably the easier way) is to create parts of your design on each page and piece it together when transferring the design. The hard part about the way I did it is making sure you line up the design perfectly.
IMPORTANT:  Make sure to print your design in reverse.  The easiest way I have found to do this is create the design on Publisher.  Once you are done creating, click "Select All" from the Edit drop down menu.  Roll your mouse over the design and right click.  Select "Save as Picture"  Then open a new publisher project and insert the picture you just saved.  Then reverse the image by selecting the "Arrange" drop down menu, "Rotate or Flip" menu and select Flip Horizontal.


Once you have your printed design, lay it out under the flour sack towel to make sure you have lined up in the area you want it and you can see how the final design will appear.  (It's hard to see in this picture, but I promise it's there.)  Now, lay it out on top of the flour sack so you know where to transfer each sheet.


I like to start in the middle and work my out from there.  Set all the other sections of the design off to the side.  Don't mix them up, you don't want to forget which one goes in which spot.


The way these print on publisher, each sheet will line up to the next one with a slight overlap.  Make sure it lines up both at the top and the bottom to help make sure you end up with an even design.


Lay the sheet face down on the towel.  Wet the cotton ball with Citrasolv (don't soak it, you don't want to immerse the paper, just moisten it).  Rub the cotton ball over the printed part of the paper.


Use a smooth surface (like the handle of a pair of scissors) to rub the entire design.  This will help transfer the design.  The more pressure you apply, the darker the transfer will be.  When you think you have covered the whole area, hold one side of the paper in place and carefully lift up the other side to make sure it looks right.  If not, lay the paper back down (making sure it is in the same spot) and try again.

Repeat this with each page until you have completed the whole design.


I made a couple more so I can send a full set of towels as a housewarming gift.






I hope she likes these as much as I do.  I was so excited with how they turned out, that I decided to make a few for myself.  And now it's your turn. Enjoy!






   




Today's Creative Blog






Tuesday To Do Party

Tip Junkie handmade projects

7 comments:

  1. So cute! I've used this method in the past and yours came out with such clean lines--amazing job!

    ReplyDelete
  2. What a great idea! I can't wait to try this.

    ReplyDelete
  3. These turned out so cute. I love all of the different designs you made.
    Thanks for sharing.

    ReplyDelete
  4. This is awesome! You are the pin of the day on my blog. http://bella-boogie.blogspot.com/2012/03/pin-of-day.html
    Thanks for sharing!!

    ReplyDelete
  5. Thanks so much for stopping by and linking up to the Tuesday To Do Party! You are one of this week's List Makers. Feel free to stop by and grab a button!
    Smiles!
    Jami
    www.blackberryvine.blogspot.com

    ReplyDelete
  6. These are adorable! Thanks so much for the tutorial using Citrisolv. I just did my first transfer using a different method and it wasn't as easy as I had hoped. This looks great. I will have to try this method next time. I am your newest follower! Would love for you to come over and check out my Queen Bee Table using another method. You will see where I ran into some problems!

    ReplyDelete
  7. This would be perfect for a Typography Challenge entry! Is that what you had in mind? (hope so!)
    Rikka J.
    Ricochet and Away!

    ReplyDelete